Wireless temperature sensors use a thermistor to accurately measure temperatures. These sensors are perfect for monitoring ambient temperatures around the sensors physical location. User customization allows you to set the frequency of readings and the ability to set thresholds for alerts or off any devices by Relay
Wireless water sensors alert you when there is water detected, preventing potential property damage that results from flooding or leaks. Place this sensor anywhere flooding or faulty plumbing could cause a problem. This sensor can also be used to detect a lack of water, allowing you to know when a container is nearing empty.
Wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required. The wireless accelerometer - tilt sensor activates at a set time interval (defined by user) and converts accelerometer measurements to pitch and roll (0 to 180° -> -180° to 0°). The data is displayed in degrees with 0.1° of resolution.
Wireless light detection sensors can be used to detect whether light is present or not. The sensors can be user calibrated for baselines of light and dark, and will provide a status of light presence based on those baselines. Alerts can then be setup for when light has been detected or when there is no light detected.
Wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the pressure measurement to Cloud. By connecting the wireless pressure sensor to a pressurized gas, liquid or vapor supply line, it can measure the pressure within the line and send data to the cloud System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. User customization allows you to set notifications and alerts from the system so you can know immediately if pressure is above or below an optimal range.
Wireless magnet detection sensors can be used to detect the presence of a magnetic source. Place a magnet strip on a production line to measure movement and placement. Alerts can be setup to notify a user if the magnet is present or not.
The wireless asset sensor can be attached to an asset or object and outputs an RF signal at set intervals to be received by the gateway and monitoring system. The sensor can be used to determine if an asset is removed from the premises and send notifications via SMS text, email or voice call to alert the user.
Wireless vehicle detection sensors can be used in a host of applications where detecting vehicle presence or motion is needed. Use this sensor for monitor the availability of the parking at the particular floor
Wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the Cloud. It is capable of generating watt hour or kilowatt hour readings as well.
This wireless finger print used to get the attendance for students, Employees and stored in the cloud through GPRS, The Reports can be viewed either in Android App/ Web.
It will sound a loud siren and flash a strobe light when an alarm message or alert is received, Simply arm & disarm by Android.
It is designed to accurately measure instantaneous current and voltage, and calculate VRMS, IRMS, instantaneous power, apparent power, active power, and reactive power for single-phase, 2- or 3-wire power metering applications.
Automatically watering the plant by connecting moisture sensor or rain sensor, or by control remote by Android, Also make a schedule of watering by using Mobile Android App
By Connecting water level sensor at the tank automatically switch on/off water pump based on the water level.
Automatically Switch On/Off, Automatically Switch on the light Evening 6 PM, Switch off the light Morning 6 AM
Turn Your Regular Shades into Smart Shades. Effortless to set up and operate with your smart phone